Shur-Loc Fabric System: 2011

Thursday, September 8, 2011

ISS Atlanta Begins Today...

The ISS Atlanta show is underway. You can find our products on display with Lawson Screen Print at booth #419. Stop by and visit Rex and the Lawson crew. More information about the ISS Atlanta show is available online at http://www.issshows.com/atlanta/ and we will see all of you at the Fort Worth show in a few weeks.

Tuesday, September 6, 2011

Shur-Loc® Fabric System has acquired PanelFRAMEtm and RollerPANELtm

September 6, 2011 – Monroe, WA

JSMD Key Products LLC/Shur-Loc^® Fabric System has acquired PanelFRAME^tm and RollerPANEL^tm as of August 18, 2011. Sales will be run through their Shur-Loc^® E-Con line of products.

Rex White, former owner of PANELFRAME.COM and ROLLERPANEL.COM, will continue to sell, service and be available for technical assistance for the products on behalf of JSMD/Shur-Loc^® and continue to be available for open houses and/or trade show demonstrations.

Shur-Loc^® panels have been available since the early 90’s and will continue to produce their full line of mesh counts in a wide variety of sizes for the textile, graphic and circuit board industries. With this new acquisition, Shur-Loc^® will now have four panel lines – Shur-Loc^® original, Shur-Loc^® E-Con using original shapes but with economy mesh, and two new economy mesh lines – the RollerPANEL^tm panels and PanelFRAME^tm panels, all of which will be manufactured at their Monroe, Washington, facility.

Shur-Loc^® will not be selling the existing PanelFRAME^tm frames that were sold earlier this year. However, they will be manufacturing a panel that will fit the existing frames on the market. To help fill the frame need in the market Shur-Loc^® is suggesting their Shur-Loc^® E-Z Conversion Kit, which is slightly less expensive, as an alternative to the current PanelFRAME^tm as well as to roller frames and/or stretch and glue frames. The Shur-Loc^® E-Z Conversion Kit allows the customer to convert their static frames into high tension E-Z frames at less than half of the cost of a roller frame. To help with this transition Shur-Loc^® is offering special discounted pricing now through October 31, 2011, on Shur-Loc^® E-Z frames and Conversion Kits, which are available for immediate sale and delivery. The Shur-Loc^® E-Z panels and E-Con panels fit both the E-Z Frames and the Conversion Kit frames of the same size.

Until October 31, 2011, Shur-Loc^® will offer their existing Shur-Loc^® Accelerator Kit A, Kit B and optional Turntable, a simple and easy way to tension roller frames, at special discounted prices as a suggested alternative to the Acme Stretcher.

You can take great pride in knowing all the products manufactured by Shur-Loc^® are American made and keeping American people employed. Shur-Loc^® would like to thank you in advance for continuing to support us and giving us the opportunity to supply you with high quality products.

Any questions and/or orders may be directed to Rex White at 888-374-3444 or rex@panelframe.com. Or, Shur-Loc^® at - 360-805-4140 or press@shurloc.com or info@shurloc.com.

Monday, August 8, 2011

Think Shur-Loc® panels are too expensive? Shur-Loc® E-Con Panels Arrive Today!

NEWS RELEASE

August 9, 2011

Shur-Loc Fabric System Updates Economy Panel Line and Refreshes Branding

“Think Shur-Loc® panels are too expensive? Think again! Try a Shur-Loc® E-Con panel today.”

Monroe, WA, August 9, 2011 - In an effort to ease the burden on Screenprinters during these tough economic times, Shur-Loc® Fabric System is announcing an expansion of our economy mesh panel line. The expansion of the economy line also includes a rebranding of the product line from the Shur-Loc® economy fabric to the new Shur-Loc® E-Con fabric panel.

The Shur-Loc® E-Con fabric panel is the next generation of the Shur-Loc® economy fabric line. Originally designed in 2007, the economy fabric line was a feature item at the Long Beach Imprinted Sportswear Show in January of 2008. The E-Con fabric dramatically decreased the cost of a mesh panel while featuring the same proven aspects of the original

Shur-Loc® fabric panel including the built-in pre-softening and deflection curve, consistency, high quality and built for high-tension.

The economy panel line has been sold through Shur-Loc®’s online store since 2008, saving printers around the world thousands of dollars and countless hours of labor. Using the Shur-Loc® E-Con fabric panel will save the end user 30-40% when compared to the use of standard Shur-Loc® Fabric Panels.

Shur-Loc® E-Con fabric panels are available in standard fabric sizes ranging from 18x20 to 25x36 and are available for roller frames, Shur-Loc® “E-Z” Frame and Shur-Loc® “E-Z” Angle Conversion Kits.

Think Shur-Loc® panels are too expensive? Think again! Try a Shur-Loc® E-Con panel today.*

Product Features:

· Made only from mesh from top tier manufacturers

· Quality design includes pre-cut shapes with engineered pre-softening and deflection curve built in to the fabric

· Shape and mesh count stamps makes inventorying mesh simple

· Removable and reusable fabrics can be stored off frames

· Saves users up to 40% over standard mesh panel

Contact:

Shur-Loc Fabric System

info@shurloc.com

(360) 805-4140

Monday, August 1, 2011

Shur-Chek130 Meter Deal...

August is here and the deals are hotter than the weather. Shop online now with the coupon code "SHURCHEK50" and receive $50 off you panel order of $200 or more when you purchase the shur-chek130 tension meter. This deal is only good until the end of the month, so buy now while supplies last.

Check out the new E-Z Frame video on our Facebook page also - updated and ready to go!

Tuesday, June 28, 2011

New Training Videos Coming Soon

There are new training videos on the way for the EZ Frame Series. We will let you know when the new 22.5* angle and 1.5 series videos are posted. The new videos will feature more about the stretching devices, the parts of the stretcher, better descriptions of the parts of the frame and even a new stretching method to make your fabrics perform even better than before.

The new video series should be posted soon, so check back at www.shurloc.com often for more details.

Friday, May 13, 2011

What Makes a Closeout Panel?

If you've ever wondered where our specials come from, you aren't alone. Many people have asked why some panels are more than 50% off and others are full price. Well, it's pretty simple. What happens during production of the fabrics, despite our best efforts, are some errors and issues. If the errors don't affect the functionality of the fabric, we can still sell them.
Things like mis-color coded fabric panels, mis-manufactured custom color fabrics (the user wanted dyed mesh instead of un-dyed) or even the most simple mistake of creating too many of one fabric at one time will lead to major discounts for you.
In an effort to make life easier for everyone to find these amazing deals, you can now see the current closeout panels online in our special closeout section on our webstore. These specials are only available from shurloc.com and are priced to move.
Every closeout fabric panel is manufactured with the same standards as our normal fabrics. Log in today to see our deals online at shurloc.com or by following us on Twitter or Facebook!

Friday, April 1, 2011

Shur-Loc Announces New Online Discount Program

Shur-Loc Fabric System is launching a new online customer discount program. Over the following weeks, more details about the program will be announced. Register online today to make sure you don't miss out on this exciting program. You can register here - http://bit.ly/gSNhEY

Wednesday, March 30, 2011

What People Are Saying About The E-Z Frame

People have been asking, "What are people saying about the "E-Z" Frame System?" Now, we are happy to let you know. So, without further ado, here are some quotes from various users from forums, online reviews and just friendly emails!

Over the years (about 10 using retens) we've used Diamond chase rollers, Newmans rollers, Shurloc EZ frames. For my money, the EZ frames are the easiest, fastest and most user friendly of all.

Screen Printers Open Forum User - Squeegee

I have a few EZ Frames with the new Murakami mesh (converting from statics). 225-40 and 330-30. They have 40% and 37% opening, but due to the thinner fibers, much lower tension. The amount of ink going through is just amazing. I've had to change my coating from 1+2 to 1+1 as way too much emulsion was going through!

Screen Printers Open Forum User - bluemoon

And there's more coming soon!

ISS Atlantic City Is Over.

The Imprinted Sportswear Show in Atlantic City, NJ is over and we want to thank everyone that stopped by for a visit. We had an overwhelming response to our new "E-Z" Angle Conversion Kit and we are processing your orders as quickly as possible.

The Conversion Kits are also now available in our online store for an amazing price! Shop online today and register before our specials run out!

If you need more information on the Conversion Kits, flyers and instructions are available online now on our "Instructions" or "Product" pages in the EZ section, or you can request them by email by contacting info@shurloc.com.

About Us

Thank you for "clicking" on the option to learn more about the Shur-Loc® company. We are a company who has been designing and introducing new and innovative products for the screenprinting industry since 1988, including the original and patented Shur-Loc® mesh panel, Accelerator Tensioning systems and E-Z Frame system consisting of a frame, a tensioning device and mesh panel. Demand the best, demand the original.

The shur-loc® Fabric System company, dba JSMD Key Products LLC, is a family owned and operated business, thus, the name, which stands for Jim, Sheri, Michael and David. The products Jim has invented are some of the keys to helping screenprinters prepare and stretch their screens easier and faster than ever before with accuracy and consistency with minimal training.

Jim majored in commercial art in college. In 1981, Jim and Sheri started Sandcarved Designs when Jim pursued a new form of art on a wood medium, which later led to screen printing the designs. The AloomaLite retensionable frames (1988) was his next project and first patent.

The company name was changed in 1991 when Jim was awarded his 3rd patent, which was for the shur-loc® Fabric System panel and screenprinting frames. The name was changed again in early 1998 to JSMD Key Products to encompass a business name separate from our product line. In late 1998 the turntable was re-designed and again in 2000 and 2003 with various improvements each time. Although either the panels or the table can be used independently of each other, they were designed to work together to obtain the optimal performance of both. Additional patents were later awarded for the Accelerator tensioning system for its improved designs including for its numbering system and physical stop features insuring the roller tubes would be turned evenly maintaining the balance implemented in the shape of the panels.

In 2004, Jim came up with the concept of using an adjustable wrench for turning the tubes, which eliminated the need for multiple "wrenches" for the various diameters of frames. It became a "one size fits all" type of wrench, savings customers hundreds of dollars.

In 2005, Jim made another discovery. For most textile size frames, the present accelerator model was more of a heavy duty system than it needed it to be, so he came up with a less expensive method of having the parts manufactured. We have passed that savings on to the customer with this more economical tensioning system. This newest version added to the product line-up is called the Accelerator 2 and is also available in a variety of Kits with an optional turntable to complete the system. Same concept, less money.

In 2006, the armor plating "Tandem System" was introduced and patented as an option to add to your roller frame. A semi-permanent addition to your frame provided the means for a smaller panel and eliminated the fragile mesh wrapping around the frame tubes. The "Extender" was introduced in early 2007 and attached to the square bar tube of roller frames "extending" the connection of the panel away from the frames square tube and eliminating the fragile mesh from breakage in rear clamping presses.

In the early summer of 2007, Jim decided to make another screenprinting frame. With numerous potential customers at each trade show indicating they only had and used static frames and complaining about not enough tension, the E-Z Frame system was designed, developed and introduced at the ISS Show in Long Beach in January of 2008 with the patent being awarded in the fall of 2010. Even though the patent had also included the E-Z angle conversion kit designed for customers to attach to their existing static frames, it was not introduced to the industry until later. The system consists of a square tube frame with 4 tension bars, standard or economical stretching device and Shur-Loc's® patented mesh panel specifically designed for the new frame. The shape of the mesh panel is designed to represent the recommended tension suggested by the mesh manufacturers. Due to the design of small corner "pockets", smaller piece of mesh and no slippage whatsoever, the tension is much more stable for a longer time period.

Another popular Shur-Loc® product is the Shur-Chek 130 Tension Meter, which is also made in the U.S.A. It is a bi-directional meter, with heavy duty construction, extremely accurate yet economically priced that was three years in the making but worth the wait.

Yet another popular product is the Shur-Loc® anti-fatigue extreme standing mats. Available in four popular sizes, 14" x 21", 2' x 3', 3' x 5' and 3' x 7'. We welcome you to visit our web site at www.shurloccom to see all of our products, additional information, instructional videos and to keep apprised current and new products. Stop by and see us at a trade show to watch a demo or stretch a panel yourself to see how E-Z it really is to use.

Jim (President), wife Sheri (Secretary/Treasurer) and youngest son, David, (Vice President) make up three of the four officers for JSMD and work full time (in addition to their other employees) at their site in Monroe, Washington, which is approximately 35 miles northeast of Seattle.

If you are a first time inquirer, we thank you for your interest in our shur-loc® Fabric System and encourage you to call or email us with any questions you may have and/or to request a free sample. If you are a current customer, we greatly appreciate your business. Either way, we value your comments and suggestions in helping us serve you better and hope you will call us at (360) 805-4140 or email us at info@shurloc.com.

Thank you,

Jim, Sheri and David Larson

JSMD Key Products LLC / aka Shur-Loc® Fabric System

14517 Fryelands Blvd S E, Monroe, WA 98272-2942

Phone 360-805-4140, Fax 360-805-4141

web: www.shurloc.com, email: sales@shurloc.com or info@shurloc.com